Today : 22 August 2017
Comment Cataloge Activity News Units Branches Products Strategy

chemical and Aromatic Dept.
Introduction :

Chemicals and Aromatics Department is one of the commercial sections of PCCI which is in charge of purchase and sale of chemical and Aromatic products such as Phenol , Acetone , Epichlorohydrin , Styrene Monomer , Acrylonitrile , Mono Ethylene Glycol , Acetic Acid which are particularly used as feed stocks for petrochemical complexes. Hereunder you may find more details about our main products.

Products :

Phenol :
Phenol is mostly used as a chemical intermediate which is produced as a white crystalline flake, but can be physically change to liquid if heated above 41 degrees C and mainly used in production of bisphenol A (BPA) in polycarbonate and epoxy resin production.

Acetone :
Acetone is a volatile and flammable liquid used for solvent purposes or as a chemical intermediate mainly in production of bisphenol A ( BPA) in polycarbonate and epoxy resin production

Epichlorohydrin :
Epichlorohydrin is a colorless and highly reactive compound and will polymerize upon treatment with acid or strong base and mostly used in production of epoxy resins.

Styrene Monomer (SM) :
Styrene Monomer is a colorless liquid chemical intermediate which polymerizes easily with heat and Light and mainly used in production of Polystyrene and ABS/SAN resins

Acrylonitrile (ACN) :
Acrylonitrile (ACN) is highly flammable and toxic liquid which is strictly used as an intermediate mainly in production of Acrylic textile fibers and ABS/SAN resins.


LPG and Fertilizer Dept.
Introduction :

LPG and Fertilizer department is in charge of purchase and sale of LPG and different types of fertilizers. At present, main activities of LPG and fertilizer department are as follow:
- Supply of LPG to Iran destination from CIS countries.
- Supply of LPG to Iraq, Pakistan, Turkey, Afghanistan destination from CIS countries as well as from Iran refineries.
- Supply of Urea to Iran destination from CIS countries.

LPG and Fertilizer department is going to supply it's customers best and trustworthy services and deliver their demanded LPG Quantity efficiently.

Products :

LPG :
LPG is manufactured during the refining of crude oil, or extracted from oil or gas streams as they emerge from the ground.

Liquefied petroleum gas (also called LPG, LP Gas, or autogas) is a mixture of hydrocarbon gases used as a fuel in heating appliances and vehicles, and increasingly replacing chlorofluorocarbons as an aerosol propellant and a refrigerant to reduce damage to the ozone layer. Varieties of LPG bought and sold include mixes that are primarily propane, mixes that are primarily butane, and the more common, mixes including both propane (60%) and butane (40%), depending on the season—in winter more propane, in summer more butane.

PCCI imports LPG from following refineries with following percentages:

Turkmenistan Refineries: Mixes including both propane (40%) and butane (60%), also Mixes including both propane (20%) and butane (80%).

Kazakhstan & Uzbekistan Refineries: Mixes including both propane (50%) and butane (50%).

Fertilizers :
Fertilizers are compounds given to plants to promote growth; they are usually applied either through the soil, for uptake by plant roots, or by foliar feeding, for uptake through leaves. Fertilizers can be organic (composed of organic matter), or inorganic (made of simple, inorganic chemicals or minerals) They typically provide, in varying proportions, the three major plant nutrients (nitrogen, phosphorus, potassium: N-P-K), the secondary plant nutrients (calcium, sulfur, magnesium) and sometimes trace elements (or micronutrients) with a role in plant or animal nutrition: boron, chlorine, manganese, iron, zinc, copper, molybdenum and (in some countries) selenium.

The major fertilizer, PCCI Company import is urea originated from CIS countries. Urea is made by reacting carbon dioxide (CO2) with anhydrous ammonia (NH3) under 3,000 psi pressures and at 350° F. CO2 + 2NH3 ¬> CO(NH2)2 + H2O Urea is the major fertilizer traded in international commerce. In the very near future urea is expected to account for more than 50% of the nitrogen fertilizer in world trade. When compared to other dry fertilizers, urea has captured more than 65% of the world trade.

Urea has a number of advantages over other nitrogen fertilizers. Urea is safer to ship and handle, it is less corrosive to equipment, it has a higher analysis than any other dry nitrogen fertilizer and it can be used on virtually all crops. Urea can be stored and distributed through conventional systems. It can be applied in many different ways from sophisticated aerial application equipment to a farm spreading urea by hand. Urea is also highly water soluble so it moves readily into the soil. The high analysis means a reduced transportation and application cost per pound of nitrogen.

PRILLED UREA SPECIFICATION:

NITROGEN : MIN 46 PCT
MOISTURE : MAX 0.5 PCT
BIURET : MAX 1 PCT

PARTICLE SIZE
BETWEEN 1-3 MM : MIN 92 PCT
BELOW 1 MM : MAX 5 PCT
BELOW 0.2 MM : MAX 0.5 PCT
ABOVE 4 MM : NIL


Oil Products & Polymers Dept.
Introduction :

Oil Products & Polymers Department is one of the commercial sections of PCCI which is in charge of purchase and sale of oil products such as Gas Oil, Naphtha, Gasoline, MTBE, Base Oil, Fuel Oil and Kerosene and also Polymers like Polypropylene, Polyethylene, PVC and etc.

For the time being, our main activities in this department are as follows:

• Purchase of Naphtha as feedstock requirement of Iranian Petrochemical Complexes.
• Supplying MTBE for Iran refineries further to their request.
• Purchase and sale of PP and other polymers required by the private sectors and our international customers.
• Supplying Gas Oil & Gasoline for our customers from Central Asian countries.
• Supplying and importing different oil products and polymers required by all international customers from different sources.

Products :

Different oil products such as Gas Oil, Gasoline, Naphtha, MTBE, Kerosene, Base Oil, Fuel Oil and etc. and also polymers like Polypropylene, Polyethylene, Polystyrene, EPS, PVC and etc. are dealt in our department. Hereunder, you can find more information about our main products:

Polypropylene :
polymerized propylene, a very light, highly resistant, thermoplastic resin used to make coatings, plastic pipe, packaging material, fibers for clothing fabrics, etc.

Polyethylene :
This product is made by the polymerization of ethylene: used in making translucent, lightweight, and tough plastics, films, containers, insulation, etc.

Naphtha :
Naphtha is a feedstock destined either for the petrochemical industry (e.g. ethylene manufacture or aromatics production) or for gasoline production. It is also used in the petrochemical industry for producing olefins in steam crackers and in the chemical industry for solvent (cleaning) applications.

Gas Oil :
Diesel or diesel fuel in general is any fuel used in diesel engines. The most common is a specific fractional distillate of crude oil.

Gasoline :
A volatile mixture of flammable liquid hydrocarbons derived chiefly from crude petroleum and used principally as a fuel for internal-combustion engines.

MTBE :
Methyl tert-butyl ether (MTBE) is a fuel oxygenate that is used in gasoline to reduce the atmospheric pollution associated with automobile emissions.

Kerosene :
Kerosene is a flammable hydrocarbon liquid. This product is widely used to power jet-engined aircraft, but is also commonly used as a heating fuel.

Base Oil :
An oil to which other oils or substances are added to produce a lubricant.

Fuel Oil :
Fuel oil is a fraction obtained from petroleum distillation, either as a distillate or a residue. Fuel oil is any liquid petroleum product that is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power.


 

Home | Sitemap | Contact us | Search